company news about Share a few tips commonly used in mechanical processing

In addition, in Shenzhen mechanical processing, there will be many workpieces not

produced by one-time production, but when the workpiece is produced, it is only

a general model. If the factory becomes a real product, some mechanical equipment

will be used to carry out mechanical processing, according to different product needs,

it will eventually become a kind of product. Products of use value.In order to ensure

the efficiency of mechanical processing and the quality of the products produced,

four principles must be followed in the process of mechanical processing.

1. Benchmark first:

When using mechanical equipment to process products, it is necessary to determine 、

a baseline, so that there can be a reference for positioning in subsequent processing.

After determining the baseline, it is necessary to process the baseline first.

2. Divide the processing stage:

In the mechanical processing of products, according to different product requirements,

different degrees of processing need to be divided. If the accuracy requirement is not high,

then a simple rough processing stage is enough. The requirement of product progress

is more and more stringent, and subsequent semi-finishing and finishing stages are

required.

3. Processing the plane first, then the hole:

In the process of mechanical processing, for the workpiece such as support, it needs

both plane processing and mechanical hole processing. In order to reduce the accuracy

error of the holes processed, processing the plane first and then processing the holes

is beneficial to reduce the error.

4. Finishing:

This principle is roughly some polishing process, which is usually done after the product

has completed the structure.